A Convenient Synthesis of Some New 1,3,4‐Thiadiazoles,Thiazoles, Pyrazolo[1,5‐a]pyrimidines,Pyrazolo[5,1‐c]triazine,and Thieno[3,2‐d]pyrimidines Containing 5‐Bromobenzofuran Moiety

1,3,4‐Thiadiazoles, pyrazolo[1,5‐a]pyrimidines, pyrazolo[5,1‐c]triazine, and thieno[3,2‐d]pyrimidines were synthesized from 1‐(5‐bromobenzofuran‐2‐yl)ethanone. The structures of the newly synthesized compounds were elucidated by elemental analysis, spectral data, chemical transformation, and alternative synthesis route whenever possible.     

Useful Precursors for Synthesis of Some New Azolo[3,4‐d]pyridiazines,Azolo[1,5‐a]pyrimidines,Azolo[5,1‐c]triazines,Pyrazoles, and Benzo[b][l,4]diazepine

Pyrazolo[3,4‐d]pyridazines, isoxazolo[3,4‐d]pyridazines, azolo[1,5‐a]pyrimidines, azolo[5,1‐c]triazines, pyrazoles, and benzo[b][l,4]diazepine were synthesized from the appropriate hydrazonoyl halides, hydroximoyl halides, heterocyclic amines, diazotized heterocyclic amines, arenediazonium chlorides, and o‐phenylenediamines with appropriate of sodium 3‐(5‐bromobenzofuran‐2‐yl)‐3‐oxoprop‐1‐en‐1‐olate or 1‐(5‐bromobenzofuran‐2‐yl)‐3‐(dimethylamino)prop‐2‐en‐1‐one. The newly synthesized compounds were elucidated by elemental analyses, spectral data, and alternative synthesis whenever possible.     

Electrochemical Capacitive K+ EMIS Chemical Sensor Based on the Dibromoaza[7]helicene as an Ionophore for Potassium Ions Detection

A K⁺‐sensitive capacitive electrolyte‐membrane‐insulator‐semiconductor (EMIS) based on a novel dibromoaza[7]helicene ionophore has been developed. An ion‐sensitive membrane based on polyvinylchloride (PVC) doped with the ionophore was deposited on the Si₃N₄/SiO₂/Si‐p/Cu‐Al transducer. The properties of the K⁺‐EMIS chemical sensor were investigated by electrochemical impedance spectroscopy (EIS). All the developed devices upon being tested have shown good sensitivity and linearity responses within the range 10^?6 M to 10^?1 M of potassium activity, with good selectivity over a wide variety of other cations (Na⁺, Li⁺, Cu²⁺, Ca²⁺, and Mg²⁺). To our knowledge, this is the first time that a capacitive field‐effect sensor has been fabricated using helicene as a carrier for K⁺‐detection, combined with the structure: Si₃N₄/SiO₂/Si‐p/Cu‐Al as a transducer.     

Evaluation of endothelial cell adhesion onto different protein/gold electrodes by EIS

To study cell attachment to biomaterials, several proteins such as fibronectin, collagen IV, heparin, immunoglobulin G, and albumin have been deposited onto polystyrene adsorbed on a self-assembled monolayer (silane or thiol) on glass or gold, respectively. The different steps of this multilayer assembly have been characterized by electrochemical impedance spectroscopy (EIS). These data are compared to those of adhesion rate, viability percentage, and cytoskeleton labeling for a better understanding of the cell adhesion process to each protein. All the proteins are endothelial cell adhering biomolecules but not with the same features. A linear relationship has been established between adhesion rate and resistance of the endothelial cell/protein interface for all negatively charged proteins.     

Film formation from nano‐sized polystyrene latex particles

This work reports on the steady state fluorescence (SSF) technique for studying film formation from surfactant‐free, nano‐sized polystyrene (PS) latex particles prepared via emulsion polymerization. The latex films were prepared from pyrene (P)‐labeled PS particles at room temperature and annealed at elevated temperatures in 5, 10, 15, 20 and 30 min time intervals above the glass transition temperature (T_g) of PS. During the annealing processes, the transparency of the film was improved considerably. Monomer and excimer fluorescence intensities, I_P and I_E respectively, from P were measured after each annealing step to monitor the stages of film formation. Evolution of transparency of the latex films was monitored by using photon transmission intensity, I_tr. Void closure and interdiffusion stages were modeled and related activation energies were determined and found to be 10.3 and 50.3 kJ mol⁻¹. Void closure temperatures, T_v, were determined from the minima of I_tr value. Copyright © 2005 John Wiley & Sons, Ltd.     

Elaboration of hydrophilic aminodextran containing submicron magnetic latex particles

Aminodextran containing submicron magnetic latex particles were prepared in two steps: (a) transformation of oil-in-water magnetic emulsion into structured magnetic latex particles via combination of seed and miniemulsion-like polymerization process and (b) immobilization (adsorption and chemical grafting) of prepared aminodextran onto negatively charged seed magnetic latex particles. The elaborated magnetic latex particles were characterized in terms of particle size, size distribution, morphology, surface charge density, chemical composition, magnetic properties, and also colloidal stability. The results showed that the morphology of the prepared seed magnetic latex is core–shell like and the cationic latex particles are hydrophilic and of high colloidal stability, irrespective of the aminodextran immobilization process.     

Synthesis of quantum dot-tagged submicrometer polystyrene particles by miniemulsion polymerization

Submicrometer fluorescent polystyrene (PS) particles have been synthesized via miniemulsion polymerization using CdSe/ZnS core-shell quantum dots (QDs). The influence of QD concentration, QD coating (either trioctylphosphine oxide (TOPO)-coated or vinyl-functionalized), and surfactant concentration on the polymerization kinetics and the photoluminescence properties of the prepared particles has been analyzed. Polymerization kinetics were not altered by the presence of QDs, whatever their surface coating. Latexes exhibited particle sizes ranging from 100 to 350 nm, depending on surfactant concentration, and a narrow particle size distribution was obtained in all cases. The fluorescence signal of the particles increased with the number of incorporated TOPO-coated QDs. The slight red shift of the emission maximum was correlated with phase separation between PS and QDs, which occurred during the polymerization, locating the QDs in the vicinity of the particle/water interface. QD-tagged particles displayed higher fluorescence intensity with TOPO-coated QDs compared to those with the vinyl moiety. The obtained fluorescent particles open up new opportunities for a variety of applications in biotechnology.     

Effect of KOH molarity and annealing temperature on ZnO nanostructure properties

In this work, ZnO nanorods (NRs) were fabricated using a low cost chemical bath deposition (CBD) method. The effect of the potassium hydroxide concentration on the fabricated ZnO nanostructures was studied in depth. The optical, structure, and surface morphology properties of the fabricated ZnO nanostructures were investigated using Uv-vis spectroscopy, XRD, and SEM. The results indicate that the formation of hexagonally structured ZnO nanorods with different lengths and diameters was dependent on the KOH concentration. The sample prepared with 2 M of KOH was the best one for optoelectronic applications, since it has the smallest diameters. This sample was annealed at different temperatures (473 K–1073 K). Positron Annihilation Lifetime Spectroscopy was used to determine the defects in the ZnO nanorods. The results show that the positron mean lifetime (τ_m) decreased as the annealing temperature increased, which means that the overall defects in the ZnO nanorods decreased with increasing temperature. Consequently, higher performance semiconductor devices based on ZnO nanorods could be fabricated after high annealing of the ZnO nanorods.     

CO(2)-Induced Degradation of Amine-Containing Adsorbents: Reaction Products and Pathways

A comprehensive study was conducted to investigate the stability of a wide variety of mesoporous silica-supported amine-containing adsorbents in the presence of carbon dioxide under dry conditions. CO(2)-induced degradation of grafted primary and secondary monoamines (pMono, sMono), diamines with one primary and one secondary amines (Diamine) and triamine with one primary and two secondary amines (TRI) as well as different impregnated polyamines such as branched and linear polyethylenimine (BPEI and LPEI) and polyallylamine (PALL) was investigated using extensive CO(2) adsorption-desorption cycling as well as diffuse reflectance infrared Fourier transform (DRIFT) and (13)C CP MAS NMR measurements. Except for sMono, all other supported amines underwent significant deactivation in the presence of dry CO(2) under mild conditions. In all cases, the decrease in CO(2) uptake was associated with the formation of urea linkages at the expense of amine groups. The urea-containing species were identified, and the deactivation pathways were delineated.     

Synthesis and Biological Evaluation of a Novel Series of Chalcones Incorporated Pyrazole Moiety as Anticancer and Antimicrobial Agents

A newly synthesized series of chalcone derivatives containing pyrazole rings were synthesized and evaluated for their cytotoxic activities in vitro against several human cancer cell lines. Most of the prepared compounds showed potential cytotoxicity against human breast cancer cell lines MCF-7, HEPG-2, and HCT-116. Also the compounds were evaluated as antimicrobial agents. The three compounds 3, 4, and 5 were proved to be better anticancer agents than the positive standard doxorubicin with IC50 values (4.7, 4.4, and 3.9???g/ml) against the same human cancer cell lines, whereas compounds 5 and 6 showed the most active antimicrobial compounds in comparison to the other chalcones.